We have become so involved with cell phone, it is difficult to leave our home and leave this device appreciated. Thinking about the above we designed an alarm that allows us to have on hand the information and control of what happens in our home, from our cell phone.
Residential alarms operate in the same way as a traditional alarm, with the only difference that sensors are used in these cases tend to be little more specific than to avoid false alarms.
When we think of installing an alarm in our place of residence, the first thing that comes in the head is that cables and installations, which can deteriorate and alter the aesthetic part of the home, but it is not necessary, because we have the possibility of using sensors Wired and wireless.
Our system has 2 cell numbers and 2 mail accounts, cases in which an anomaly occurs when the system is activated, sends a message, where the irregularity is specified inside the house. It has a graphical screen where you can see the events, sensor programming menu, remote controls, time and date of the system among others. The alarm works with any cell phone operator.
This alarm allows the monitoring to fully perform the user, however, if the desire we have the monitoring service of a plant that is available 24 hours and at the time of an anomaly, is responsible for checking that no sea A false alarm and to communicate to the user and the corresponding authority.
Technical specifications
- -GPRS-TCP / IP communication monitoring
- -Send SMS messages to 2 mobile phones
- -Send messages to 2 emails
- -Send SMS messages to 2 alarm servers.
- -LED LCD display, shows system status
- -8 monitoring zones and 2 relay outputs
- - RF communication, for wireless control of ebm LED lamps and reading of ebm wireless sensors.
- - Input for sensors of smoke and natural gas ebm.
- -Send of events to 4 servers in backup form.
- -Model GSM, quad band: GSM 850/900/1800/1900 MHz
- -GPRS-TCP / IP remote programming
- -Update Firmware Remotely via GPRS-TCP / IP
- -Transmission time to central monitoring 2 to 2 sec.
- - Supervised entrances at 4.7 Kohms
- - Power supply 12 VDC, 1500 mA
- -Operating temperature 0 ° C to + 50 ° C.